I can’t take the credit for this one as my 9 year old made it in school last year, but it’s just too good not to have on Science Sparks. I love that it’s more than just a circuit. One of my daughters made a long torch and the other a head torch. Both are made using a simple circuit with a paperclip switch.

What you need to make a DIY torch with a switch

Pringles tube and lid

Card cut into a cone shape with foil over the top

Small bulb


Battery holder with wires attached

1 more wire


2 split pins

Double sided tape

Materials for a DIY Head torch


Carefully make two small holes in the side of the Pringles tube. These are for the split pins to go through and will form the switch.

Make sure you have a wire attached to each end of the battery holder and use double sided tape to attach the battery holder to the inside bottom or side of the Pringles tube.

Push the the end of one wire from the battery holder through one hole and secure with a split pin.

DIY Torch - split pin switch

Take the spare wire and push one end of this through the second hole and secure with the second split pin.

The two wire ends left need to be attached to the bulb.

You should have a complete circuit apart from the gap between the split pins.

Place the paperclip over the split pin ends to check the bulb lights when the circuit is complete.

If it doesn’t work check for loose wires and try again.

Carefully make a hole through the centre of the card and foil cone and push the bulb through.

Cut the cone down to size so it fits tightly inside the top of the tube.

Place the Pringles lid on top to cover the bulb.

DIY torch
Small DIY torch

Carefully twist one end of the paperclip around the top split pin. You should be able to turn the bulb on and off by twisting the paperclip so it touches the second pin.

Pringles Can torches

Decorate as you wish.

If you use a long Pringles tube make a door in the middle to attach your circuit.

To make a head torch attach an elastic band around the Pringles tube.

More Electricity Experiments for Kids

Learn about series circuits by making a whole street of light up houses!

Construct a switch with cardboard and a paperclip.

Try these circuit cards from the Science Kiddo.

Experiment with play dough circuits.

Make a DIY torch using a simple circuit. Easy electricity activity for kids #electricityforkids #circuitsforkids #scienceforkids

The post DIY Torch Light – Simple Circuit appeared first on Science Experiments for Kids.

Originally posted at Science Sparks